Flatpack S System

Der zunehmende Bedarf an höheren Bandbreiten und die steigende Komplexität von Netzwerken erfordern flexible und erweiterbare DC-Stromversorgungslösungen. Aufgrund der geringen Einbauhöhe (1HE), der hohen Effizienz bzw. des Wirkungsgrades, der Zuverlässigkeit und des vielfältigen Einsatzbereiches, ist das Flatpack S System der Schlüssel für zukünftige Anforderungen. Durch die geringe Einbautiefe eignen sich die Systeme sehr gut für den Einbau in die meisten 19“ Schränke nach dem ETSI-Standard und sind somit eine hervorragende Ersatzlösung für bereits bestehende Installationen.
1 CONTROLLER + 2 RECTIFIERS und 1 CONTROLLER + 3 RECTIFIERS
Hauptmerkmale des Flatpack S Systems
 
  • Komplettes System
    • Smartpack S Steuergerät
    • Rectifiers
    • Batterieverteilung
    • Lastverteilung
  • 262 mm Systemtiefe
  • 1U Höhe
  • Hot Pluggable Gleichrichter
  • Hot Pluggable Controller
  • Erweiterte Steuerung und Überwachung über Ethernet-Anschlüsse
  • 2R (40A) Lastoptionen
    • 7 x 30A MCB Steckplätze (Optional LVLD)
    • 4 x 30A MCB Front
    • 7 x 15A Sicherungen Front
  • 3R (100A) Lastoptionen
    • 2 x 80A
Flatpack S 48V 1800W Rectifier
Smartpack S Controller
Model 1 Controller + 2 Rectifiers 1 Controller + 3 Rectifiers
Input data 100 – 250VAC 100 – 250VAC
Mains Configuration 230VAC, 1 phase or 2 x 1phase 230VAC, 3 x 1 phase or 3 phase(∆) 230/400VAC, 3 phase (Y)
Mains Connection 2,5mm2 Terminal blocks, rear connection 2,5mm2 Terminal blocks, rear connection
Frequency 45 to 66Hz 45 to 66Hz
Model 1 Controller + 2 Rectifiers 1 Controller + 3 Rectifiers
Voltage – 48VDC – 48VDC
Max. Current 40A 100A
Model 1 Controller + 2 Rectifiers 1 Controller + 3 Rectifiers
LVBD Default Default
Breaker (Plug-in type) maximum size 2 x 40A1) 2 x 80A1)
Connection (rear) 16mm2 Terminal blocks M6 cable lug
Model 1 Controller + 2 Rectifiers 1 Controller + 3 Rectifiers
Rear connections N/A 2 x 80A, M6 cable lug
Rear cabel entry, front access Connections, screw terminals Optional LVLD 7 x 30A MCB2)) N/A
Rear cabel entry, front access Connections, screw terminals Optional LVLD 7 X 4mm2 N/A
Rear cabel entry, front access Connections, screw terminals Optional LVLD on MCB 1 and 2 N/A
Rear cabel entry, front access Connections, screw terminals Optional LVLD 4 x 30A MCB / 7 x 15A Fuse 4mm2 N/A
Model 1 Controller + 2 Rectifiers 1 Controller + 3 Rectifiers
Smartpack S 6x Input/Output and Ethernet, See Smartpack S datasheet 6x Input/Output and Ethernet, See Smartpack S datasheet
Model 1 Controller + 2 Rectifiers 1 Controller + 3 Rectifiers
Dimensions (W/H/D) 19″/1U/262mm Recommended minimum cabinet depth, 300 mm 19″/1U/262mm Recommended minimum cabinet depth, 300 mm
Weight, including controller and distributions, excluding rectifiers 5.2 kg [11.5 lbs] 5.3 kg [11.7 lbs]
Model 1 Controller + 2 Rectifiers 1 Controller + 3 Rectifiers
Dimensions (W/H/D) 19″/1U/262mm Recommended minimum cabinet depth, 300 mm 19″/1U/262mm Recommended minimum cabinet depth, 300 mm
Weight, including controller and distributions, excluding rectifiers 5.2 kg [11.5 lbs] 5.3 kg [11.7 lbs]
Model 1 Controller + 2 Rectifiers 1 Controller + 3 Rectifiers
Electrical safety UL 60950-1, EN 60950-1 UL 60950-1, EN 60950-1
EMC ETSI EN 300 386 V.1.4.1
EN 61000-6-1 (immunity, light industry)
EN 61000-6-2 (immunity, industry)
EN 61000-6-3 (emission, light industry)
EN 61000-6-4 (emission, industry)
ETSI EN 300 386 V.1.4.1
EN 61000-6-1 (immunity, light industry)
EN 61000-6-2 (immunity, industry)
EN 61000-6-3 (emission, light industry)
EN 61000-6-4 (emission, industry)
Environment ETSI EN 300 019-2-1 Class 1.2
ETSI EN 300 019-2-2 Class 2.3
ETSI EN 300 019-2-3 Class 3.2
ETSI EN 300 019-2-1 Class 1.2
ETSI EN 300 019-2-2 Class 2.3
ETSI EN 300 019-2-3 Class 3.2
1) If only one string is used, one of the battery breakers can be configured as a load breaker.
2) Drawer solution, front access for actual connection, but cables enters from rear